Cylinder wall to piston clearance with Nitrous.

Print Thread

Re: Cylinder wall to piston clearance with Nitrous. [Re: 70satelliteguy] #1525964 10/30/13 04:06 PM 10/30/13 04:06 PM
Joined: Mar 2013 Posts: 47 CO N Nitrojunkee member
Nitrojunkee member N Joined: Mar 2013 Posts: 47 CO	Quote: Yes they are Ross forged pistons. I just did not want to put it back together at 008 if there would be a problem! "You may get a little slap when It's cold" I will never be able to hear it anyway Thanks MIke Exactly! FYI, Diamond recommended .0075 on my custom blower pistons... Minus .002 for hard anodized coating. So I think you're right on!

Entire Thread
Subject	Posted By	Posted
Cylinder wall to piston clearance with Nitrous.	70satelliteguy	10/30/13 07:08 PM
Re: Cylinder wall to piston clearance with Nitrous.	Biginchmopar	10/30/13 07:10 PM
Re: Cylinder wall to piston clearance with Nitrous.	Nitrojunkee	10/30/13 07:16 PM
Re: Cylinder wall to piston clearance with Nitrous.	70satelliteguy	10/30/13 07:40 PM
Re: Cylinder wall to piston clearance with Nitrous.	Nitrojunkee	10/30/13 08:06 PM
Re: Cylinder wall to piston clearance with Nitrous.	cudaman1969	10/30/13 07:41 PM
Re: Cylinder wall to piston clearance with Nitrous.	70satelliteguy	10/30/13 07:46 PM
Re: Cylinder wall to piston clearance with Nitrous.	cudaman1969	10/31/13 03:28 AM
Re: Cylinder wall to piston clearance with Nitrous.	572charger	10/31/13 11:01 AM
Re: Cylinder wall to piston clearance with Nitrous.	70satelliteguy	10/31/13 07:41 PM
Re: Cylinder wall to piston clearance with Nitrous.	Cab_Burge	11/01/13 01:56 AM
Re: Cylinder wall to piston clearance with Nitrous.	572charger	11/03/13 12:01 PM
Re: Cylinder wall to piston clearance with Nitrous.	moparniac	10/30/13 07:48 PM
Re: Cylinder wall to piston clearance with Nitrous.	Crizila	10/31/13 12:25 AM

Hop To