440 Timing....what is my timing reference point?????

Print Thread

440 Timing....what is my timing reference point????? #1478577 08/02/13 08:32 PM 08/02/13 08:32 PM
Joined: Jan 2007 Posts: 292 State of Flux Dodge Don OP enthusiast
Dodge Don OP enthusiast Joined: Jan 2007 Posts: 292 State of Flux	See picture below. When I'm timing the engine am I looking at the hole in the middle, the top of the tab or the bottom of the tab to see the timing degrees??

Entire Thread
Subject	Posted By	Posted
440 Timing....what is my timing reference point?????	Dodge Don	08/03/13 12:32 AM
Re: 440 Timing....what is my timing reference point?????	buildanother	08/03/13 01:02 AM
Re: 440 Timing....what is my timing reference point?????	Dodge Don	08/03/13 01:31 AM
Re: 440 Timing....what is my timing reference point?????	BSB67	08/03/13 01:34 AM
Re: 440 Timing....what is my timing reference point?????	Dodge Don	08/03/13 01:43 AM
Re: 440 Timing....what is my timing reference point?????	Dodge Don	08/03/13 01:53 AM
Re: 440 Timing....what is my timing reference point?????	BSB67	08/03/13 01:56 AM
Re: 440 Timing....what is my timing reference point?????	BSB67	08/03/13 01:32 AM
Re: 440 Timing....what is my timing reference point?????	Cab_Burge	08/03/13 03:39 AM
Re: 440 Timing....what is my timing reference point?????	Lefty	08/03/13 10:09 PM
Re: 440 Timing....what is my timing reference point?????	RapidRobert	08/03/13 04:16 AM
Re: 440 Timing....what is my timing reference point?????	Dodge Don	08/03/13 06:53 PM
Re: 440 Timing....what is my timing reference point?????	Dodge Don	08/03/13 07:32 PM
Re: 440 Timing....what is my timing reference point?????	RapidRobert	08/03/13 11:51 PM
Re: 440 Timing....what is my timing reference point?????	Dodge Don	08/03/13 11:55 PM
Re: 440 Timing....what is my timing reference point?????	Cab_Burge	08/04/13 02:28 AM
Re: 440 Timing....what is my timing reference point?????	Dodge Don	08/04/13 06:12 PM
Re: 440 Timing....what is my timing reference point?????	Dodge Don	08/05/13 01:25 AM
Re: 440 Timing....what is my timing reference point?????	RapidRobert	08/05/13 02:13 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To