I am restoring a 71 Satellite/Roadrunner clone and I replaced the wiring harness with a aftermarket harness. The aftermarket harness instructions had a section for Mopars and had a wire color cross reference. I got everything installed and every thing works except for the power to the ignition system. The harness instructions had me connect the power to the ignition/coil to the thick brown wire coming for the steering column so I checked the brown wire and it does not have power with the key off, on or in the start position. My question is this;ia the brown wire the correct wire to have the ignition wired to? If it is correct my steering column may have an issue which is possible because this car was a basket case before the restoration so I have never heard it run so I can't be sure it worked before. Thanks for the help.