MP 4876129 manifold - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech MP 4876129 manifold

Print Thread

Re: MP 4876129 manifold [Re: rebel] #1470684 07/24/13 10:49 AM 07/24/13 10:49 AM
Joined: Jan 2003 Posts: 15,439 Val-haul-ass... eventually B BradH Taking time off to work on my car
BradH Taking time off to work on my car B Joined: Jan 2003 Posts: 15,439 Val-haul-ass... eventually	MP RB Stage VI spacers are .850" thick, IIRC. Dwayne Porter mounted mine to the heads w/ counter-sunk screws to keep them positioned properly while port-matching them to the heads' runners & intake manifold.

Entire Thread
Subject	Posted By	Posted
MP 4876129 manifold	rebel	07/20/13 02:23 AM
Re: MP 4876129 manifold	AndyF	07/20/13 02:52 AM
Re: MP 4876129 manifold	Dean_Kuzluzski	07/20/13 12:56 PM
Re: MP 4876129 manifold	avenger572	07/20/13 02:03 PM
Re: MP 4876129 manifold	rebel	07/20/13 10:38 PM
Re: MP 4876129 manifold	avenger572	07/23/13 01:52 AM
Re: MP 4876129 manifold	BradH	07/22/13 09:26 PM
Re: MP 4876129 manifold	rebel	07/23/13 05:51 AM
Re: MP 4876129 manifold	ZIPPY	07/23/13 02:18 PM
Re: MP 4876129 manifold	rebel	07/24/13 10:07 AM
Re: MP 4876129 manifold	BradH	07/24/13 02:49 PM
Re: MP 4876129 manifold	rebel	07/25/13 05:40 AM
Re: MP 4876129 manifold	ta3834bbl	07/25/13 06:07 AM
Re: MP 4876129 manifold	AndyF	07/26/13 09:58 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1