half groove bearing or full groove

Print Thread

Re: half groove bearing or full groove [Re: BeeSuper] #1464807 07/08/13 07:59 PM 07/08/13 07:59 PM
Joined: Aug 2003 Posts: 1,314 Charlotte, NC L LSP pro stock
LSP pro stock L Joined: Aug 2003 Posts: 1,314 Charlotte, NC	I haven't had any issues using 1/2 groove mains in anything, and have used 3/8 groove mains in a 8200 rpm build with .680" wide rod bearings.

Entire Thread
Subject	Posted By	Posted
half groove bearing or full groove	BeeSuper	07/08/13 06:14 PM
Re: half groove bearing or full groove	dOc …	07/08/13 06:20 PM
Re: half groove bearing or full groove	MR_P_BODY	07/08/13 07:06 PM
Re: half groove bearing or full groove	Mopar Mitch	07/08/13 07:18 PM
Re: half groove bearing or full groove	MR_P_BODY	07/08/13 07:49 PM
Re: half groove bearing or full groove	poboyengineering	07/08/13 08:35 PM
Re: half groove bearing or full groove	Cab_Burge	07/08/13 09:20 PM
Re: half groove bearing or full groove	383man	07/08/13 10:17 PM
Re: half groove bearing or full groove	52savoy	07/08/13 10:30 PM
Re: half groove bearing or full groove	justinp61	07/08/13 11:36 PM
Re: half groove bearing or full groove	383man	07/09/13 01:54 AM
Re: half groove bearing or full groove	Sport440	07/09/13 11:35 PM
Re: half groove bearing or full groove	Cab_Burge	07/10/13 02:05 AM
Re: half groove bearing or full groove	BIGSPEED	07/11/13 06:16 AM
Re: half groove bearing or full groove	572charger	07/12/13 11:57 AM
Re: half groove bearing or full groove	gregsdart	07/12/13 02:33 PM
Re: half groove bearing or full groove	MR_P_BODY	07/12/13 02:53 PM
Re: half groove bearing or full groove	dodgeboy11	07/13/13 12:41 AM
Re: half groove bearing or full groove	5spdcuda	07/08/13 08:51 PM
Re: half groove bearing or full groove	LSP	07/08/13 11:59 PM
Re: half groove bearing or full groove	Hot 340	07/09/13 12:52 AM
Re: half groove bearing or full groove	dusturbd340W5	07/09/13 01:01 AM
Re: half groove bearing or full groove	Hot 340	07/09/13 01:41 AM

Hop To