Head gaskets and Eddy head on 440

Print Thread

Re: Head gaskets and Eddy head on 440 [Re: VernMotor] #1443831 05/28/13 09:52 PM 05/28/13 09:52 PM
Joined: Aug 2003 Posts: 1,385 Ohio rck850 OP pro stock
rck850 OP pro stock Joined: Aug 2003 Posts: 1,385 Ohio	How much should I mill the heads? What is usually the going rate to cut new aluminum heads?

Entire Thread
Subject	Posted By	Posted
Head gaskets and Eddy head on 440	rck850	05/28/13 11:38 PM
Re: Head gaskets and Eddy head on 440	VernMotor	05/29/13 12:32 AM
Re: Head gaskets and Eddy head on 440	rck850	05/29/13 01:37 AM
Re: Head gaskets and Eddy head on 440	Mopar Guy	05/29/13 01:44 AM
Re: Head gaskets and Eddy head on 440	VernMotor	05/29/13 01:45 AM
Re: Head gaskets and Eddy head on 440	rck850	05/29/13 01:52 AM
Re: Head gaskets and Eddy head on 440	VernMotor	05/29/13 02:21 AM
Re: Head gaskets and Eddy head on 440	rck850	05/29/13 02:24 AM
Re: Head gaskets and Eddy head on 440	VernMotor	05/29/13 02:38 AM
Re: Head gaskets and Eddy head on 440	deaks	05/29/13 02:58 PM
Re: Head gaskets and Eddy head on 440	JohnRR	05/29/13 04:15 PM
Re: Head gaskets and Eddy head on 440	BM70Dart	05/29/13 04:23 PM
Re: Head gaskets and Eddy head on 440	JohnRR	05/29/13 04:25 PM
Re: Head gaskets and Eddy head on 440	rck850	05/29/13 07:29 PM
Re: Head gaskets and Eddy head on 440	rck850	05/29/13 08:49 PM
Re: Head gaskets and Eddy head on 440	JohnRR	05/29/13 09:54 PM
Re: Head gaskets and Eddy head on 440	Sport440	05/29/13 10:24 PM
Re: Head gaskets and Eddy head on 440	rck850	05/29/13 10:52 PM
Re: Head gaskets and Eddy head on 440	Sport440	05/29/13 10:59 PM
Re: Head gaskets and Eddy head on 440	sam64	05/29/13 11:02 PM
Re: Head gaskets and Eddy head on 440	codfish	05/29/13 02:28 AM
Re: Head gaskets and Eddy head on 440	therocks	05/29/13 03:15 PM

Hop To