Build almost done Thoughts on Power#'s Results are in

Print Thread

Build almost done Thoughts on Power#'s Results are in #1432360 05/08/13 05:20 PM 05/08/13 05:20 PM
Joined: Jan 2012 Posts: 3 Minnesota C cudasteve72 OP member
cudasteve72 OP member C Joined: Jan 2012 Posts: 3 Minnesota	Ok here it is. I was hoping you guys could help me guess power numbers for my build specs are as follow: 72 340 .030 over 4.070 bore 4" scat forged crank Scat forged rods Icon flat top pistons Comp Cams 286 extreme energy hydraulic roller cam 236 intake 242 exhaust a .050" 110* lobe separation Edelbrock Performer RPM Heads 2.02 1.60 valves 171 intake 77 cc intake/exhaust runners 65cc combustion chambers PRW 1.5 Roller tip rockers Edelbrock rpm air gap intake ProForm 850 Street series Mechanical secondaries Internally balanced getting ready for the dyno Last edited by cudasteve72; 05/28/13 07:10 PM.

Entire Thread
Subject	Posted By	Posted
Build almost done Thoughts on Power#'s Results are in	cudasteve72	05/08/13 09:20 PM
Re: Build almost done Thoughts on Power#'s	B3422W5	05/08/13 09:30 PM
Re: Build almost done Thoughts on Power#'s	dodgeboy11	05/09/13 02:25 AM
Re: Build almost done Thoughts on Power#'s	Dunnuck Racing	05/09/13 02:40 AM
Re: Build almost done Thoughts on Power#'s	Dunnuck Racing	05/09/13 02:50 AM
Re: Build almost done Thoughts on Power#'s	cudasteve72	05/28/13 08:02 PM

Hop To