I got an old self adjuster off a C body rear end I had and had to go to a yard to get the crossbar, turns out I already had one but had to go get another. problem is though it doesn't want to go back together, it's as if the crossbar is too long or I have the wrong brake cable. I hooked the cable to the bracket on the frame first then hooked it up to the pivot arm and it wasn't easy to get on, as the cable already had some strain on it, making if very hard to push the spring back to get the arm on. Now the whole mess is lopsided and the right side pushrod is pointed way up. Hard to see in the pic whats going on. I can't see cable being the wrong one, the guy said there is only one right rear cable listed and he double checked the part #.