Chamfer at the top of 440 cylinder bores...

Print Thread

Re: Chamfer at the top of 440 cylinder bores... [Re: AndyF] #140858 10/24/08 04:51 PM 10/24/08 04:51 PM
Joined: Jan 2003 Posts: 2,930 Odessa, Tx. cudarex master
cudarex master Joined: Jan 2003 Posts: 2,930 Odessa, Tx.	I had to use a 4.5" gasket on my .030" over bores.

Entire Thread
Subject	Posted By	Posted
Chamfer at the top of 440 cylinder bores...	Blakcharger440	10/24/08 03:53 PM
Re: Chamfer at the top of 440 cylinder bores...	topside	10/24/08 04:05 PM
Re: Chamfer at the top of 440 cylinder bores...	AndyF	10/24/08 07:10 PM
Re: Chamfer at the top of 440 cylinder bores...	cudarex	10/24/08 08:51 PM
Re: Chamfer at the top of 440 cylinder bores...	AlexP	10/24/08 10:10 PM
Re: Chamfer at the top of 440 cylinder bores...	Blakcharger440	10/25/08 08:21 PM
Re: Chamfer at the top of 440 cylinder bores...	440PURSUIT	10/25/08 09:38 PM
Re: Chamfer at the top of 440 cylinder bores...	topside	10/25/08 10:35 PM

Hop To