Met an awesome AMC guru up in West Virginia today named Barry Allen. We're gonna do a 401 with a crank offset ground to 3.8" to use a 6" SBC rod and a 4.195"
Bore for about 420 cubes.

Barry is awesome, so knowledgable and yet so down to earth about his vast knowledge. He built a 439" Indy AMC that Dyno's over 1000 hp, it was sitting on the stand. He aslso has some incredible port work done to several sets of AMC iron heads.

OBTW, he had several other motors he was working his manic on, including the orange ones with the spark plugs going through the valve covers.

VERY COOL guy!