Quote:

Quote:

Quote:

I use a scraper on the iron parts, block and/or heads and if it's aluminum very carefully with a razor blade as to not gouge the aluminum. Finish it off by hand with a scruffy pad.


If you can't feel anything on the surface with a fresh razor blade, the gasket won't know the difference.



I know, just me being a bit anal.


Nothing wrong with a little extra tlc

Last edited by gregsdart; 03/01/13 02:08 AM.
8..603 156 mph best, 2905 lbs 549, indy 572-13, alky