Saving sheet metal?

Print Thread

Re: Saving sheet metal? [Re: Silver70] #1385613 02/11/13 11:11 PM 02/11/13 11:11 PM
Joined: Jan 2003 Posts: 9,670 Lima, Peru domingo EL Master
domingo EL Master Joined: Jan 2003 Posts: 9,670 Lima, Peru	I think saving the original sheetmetal and patching is always better....if they are small patches.... AND IF YOU HAVE THE ABILITY TO MAKE A GOOD CLEAN PATCH!!! Im not talking about the above mentioned "franken-patches" that need to be buried in bondo afterwards....those suck!

Entire Thread
Subject	Posted By	Posted
Saving sheet metal?	OhioMopar	02/11/13 07:55 PM
Re: Saving sheet metal?	sixpackbee	02/11/13 08:07 PM
Re: Saving sheet metal?	70440+6bbl	02/11/13 08:08 PM
Re: Saving sheet metal?	OhioMopar	02/11/13 08:14 PM
Re: Saving sheet metal?	70440+6bbl	02/11/13 08:18 PM
Re: Saving sheet metal?	OhioMopar	02/11/13 08:28 PM
Re: Saving sheet metal?	DAYCLONA	02/11/13 10:03 PM
Re: Saving sheet metal?	Silver70	02/11/13 11:55 PM
Re: Saving sheet metal?	domingo	02/12/13 03:11 AM
Re: Saving sheet metal?	OhioMopar	02/12/13 07:54 AM
Re: Saving sheet metal?	Silver70	02/12/13 08:01 AM
Re: Saving sheet metal?	ek3	02/12/13 08:36 AM
Re: Saving sheet metal?	OhioMopar	02/12/13 02:32 PM
Re: Saving sheet metal?	clonedshaker+6	02/13/13 01:13 AM
Re: Saving sheet metal?	OhioMopar	02/13/13 09:56 AM
Re: Saving sheet metal?	clonedshaker+6	02/13/13 07:39 PM
Re: Saving sheet metal?	Birdturd	02/15/13 01:10 AM
Re: Saving sheet metal?	flypaper	02/15/13 02:26 AM
Re: Saving sheet metal?	OhioMopar	02/15/13 03:58 AM
Re: Saving sheet metal?	flypaper	02/15/13 04:11 AM
Re: Saving sheet metal?	OhioMopar	02/15/13 07:24 AM
Re: Saving sheet metal?	flypaper	02/16/13 12:07 AM
Re: Saving sheet metal?	Silver70	02/16/13 08:28 AM
Re: Saving sheet metal?	OhioMopar	02/16/13 10:56 AM
Re: Saving sheet metal?	Q5_Ed	02/16/13 12:51 PM
Re: Saving sheet metal?	Q5_Ed	02/16/13 12:56 PM
Re: Saving sheet metal?	Q5_Ed	02/16/13 12:59 PM
Re: Saving sheet metal?	Q5_Ed	02/16/13 01:06 PM
Re: Saving sheet metal?	Q5_Ed	02/16/13 01:09 PM
Re: Saving sheet metal?	Q5_Ed	02/16/13 01:12 PM
Re: Saving sheet metal?	OhioMopar	02/16/13 01:33 PM
Re: Saving sheet metal?	flypaper	02/16/13 02:12 PM
Re: Saving sheet metal?	Q5_Ed	02/16/13 02:23 PM
Re: Saving sheet metal?	Silver70	02/16/13 08:41 PM
Re: Saving sheet metal?	Q5_Ed	02/16/13 09:47 PM
Re: Saving sheet metal?	Silver70	02/16/13 10:20 PM
Re: Saving sheet metal?	flypaper	02/17/13 03:37 AM
Re: Saving sheet metal?	OhioMopar	02/16/13 04:52 PM
Re: Saving sheet metal?	RoadRunner	02/16/13 07:26 PM
Re: Saving sheet metal?	OhioMopar	02/16/13 07:35 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To