Set screw size for orifice in top of block BB.

Print Thread

Re: Set screw size for orifice in top of block BB. [Re: VernMotor] #1384125 02/11/13 04:25 AM 02/11/13 04:25 AM
Joined: Jan 2004 Posts: 27,347 Today? Who Knows? 1_WILD_RT Management Trainee
1_WILD_RT Management Trainee Joined: Jan 2004 Posts: 27,347 Today? Who Knows?	I've seen it suggested here in the past to put the restrictors in the oil passage in the heads rather than the block so if you decide to tune the oil supply to the heads it can be changed without pulling the heads... "The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers."

Entire Thread
Subject	Posted By	Posted
Set screw size for orifice in top of block BB.	VernMotor	02/09/13 10:11 PM
Re: Set screw size for orifice in top of block BB.	Stanton	02/10/13 12:25 AM
Re: Set screw size for orifice in top of block BB.	VernMotor	02/10/13 12:28 AM
Re: Set screw size for orifice in top of block BB.	RoadRunnerJD	02/10/13 01:12 AM
Re: Set screw size for orifice in top of block BB.	hustlin hoosier	02/10/13 04:30 AM
Re: Set screw size for orifice in top of block BB.	Stanton	02/10/13 05:29 AM
Re: Set screw size for orifice in top of block BB.	MR_P_BODY	02/10/13 06:22 AM
Re: Set screw size for orifice in top of block BB.	dogdays	02/10/13 06:31 AM
Re: Set screw size for orifice in top of block BB.	MR_P_BODY	02/10/13 06:51 AM
Re: Set screw size for orifice in top of block BB.	VernMotor	02/10/13 04:00 PM
Re: Set screw size for orifice in top of block BB.	VernMotor	02/10/13 04:40 PM
Re: Set screw size for orifice in top of block BB.	VernMotor	02/10/13 08:01 PM
Re: Set screw size for orifice in top of block BB.	Von	02/10/13 08:31 PM
Re: Set screw size for orifice in top of block BB.	Cab_Burge	02/11/13 07:44 AM
Re: Set screw size for orifice in top of block BB.	1_WILD_RT	02/11/13 08:25 AM

Hop To