The Schumacher BB headers are nice and are phased 180 degrees (which is the way I'd do it.) But thier small block set is not 180 for some reason.
bang for the buck the Hooker 1 7/8" are worth the extra $$$ over the Hedman/Summit 1 3/4" mainly since they are both a thicker flange and primary tube gauge. I like to run the hookers with a 3 1/2" slip-fit collector after cutting off the factory (too small) 3". It's an easy job for any competent exhaust shop.
bang for the buck the Hooker 1 7/8" are worth the extra $$$ over the Hedman/Summit 1 3/4" mainly since they are both a thicker flange and primary tube gauge. I like to run the hookers with a 3 1/2" slip-fit collector after cutting off the factory (too small) 3". It's an easy job for any competent exhaust shop.
