I just recently got a 75 Dodge Power Wagon. It is a 440, 4 speed with the 203 t-case Full Time 4wd. It seems a bit taller than stock, but I don't know what a stock W200 should sit like.
I was given a 3 inch body lift kit which consists of several plastic spacers, steel hardware and some rudimentary instructions. The tires on the truck are weathercracked to the point where I'd never trust them on the road, so I'll be replacing them. I may run 35s.
I've never installed a body lift, so I am curious about the mods needed. I figure that the hard lines to the master cylinder have enough slack. The trans and t-case shifters will just sit lower. Is the steering column affected? Do you have to clearance the bottom of the fan shroud? What other mods are necessary? Thanks, Greg