Like I said numerous times the goal is to go into the 10's in the 1/4!! The car is 2800 lbs race ready so we have a big advantage and don't need as much motor as some. We have had 3 engines through out 6 years and 2 ran ok and 1 didn't. My plan is to build probaly a real small stroker maybe just a 372 cubic inch engine. I don't need 416 to run in the 10's. Time table is to be out in the month of June. No I do not have 4k to spend off hand but if you give me 3 months that will be a different story. This engine will be built with mostly new parts. I plan on running some crane gold roller rockers and probaly selling the ductile iron rockers. I am way better off then you think I am from the way you are acting and making it sound. But Time Will Tell Won't It!