318 with a 360 crank and magnum heads what pistons?

Print Thread

Re: 318 with a 360 crank and magnum heads what pistons? [Re: 70AARcuda] #1361432 12/30/12 04:52 PM 12/30/12 04:52 PM
Joined: May 2003 Posts: 15,487 Florida S scratchnfotraction I Live Here
scratchnfotraction I Live Here S Joined: May 2003 Posts: 15,487 Florida	Quote: the skirts on those pistons will need to be machine so that the 360 journals do not hit them... also with no valve reliefs..your cam lift is going to be limited. http://www.forabodiesonly.com/mopar/showthread.php?t=211511&highlight=347 so would that be the silvlite 1278 piston referanced in your link? a while back i did some looking and came up with these.. sealed power LC371P silvolite 1278 badger p287 AE Clevite engine parts 2241930* *which I assume is the first one of the two the OP listed. I have a 360 crank going into a roller cam 318 block and need to figure out piston and heads also. with the stock 318 pistons and 360 crank it makes a 346 cubic inch.correct? I have been grinding on the skirts of some old 318 pistons but i dont think I would trust it to run it with a tight budget. what piston for a 349 CI? surly there is a piston that does not need grinding to fit/work

Entire Thread
Subject	Posted By	Posted
318 with a 360 crank and magnum heads what pistons?	bnichols	12/30/12 02:24 PM
Re: 318 with a 360 crank and magnum heads what pistons?	70Cuda383	12/30/12 02:39 PM
Re: 318 with a 360 crank and magnum heads what pistons?	RapidRobert	12/30/12 04:42 PM
Re: 318 with a 360 crank and magnum heads what pistons?	Streetwize	12/30/12 05:03 PM
Re: 318 with a 360 crank and magnum heads what pistons?	bnichols	12/30/12 06:33 PM
Re: 318 with a 360 crank and magnum heads what pistons?	70AARcuda	12/30/12 07:39 PM
Re: 318 with a 360 crank and magnum heads what pistons?	scratchnfotraction	12/30/12 08:52 PM
Re: 318 with a 360 crank and magnum heads what pistons?	360view	12/30/12 05:01 PM
Re: 318 with a 360 crank and magnum heads what pistons?	360view	12/30/12 05:07 PM

Hop To