Well I have started on the dissasembly of the car that Rico bought early this year and had out at the Spring Fling in Van Nuys back in April. Me and 2 other mopar guys have done a little horsetrading and will give this car a basic freshing up and another chance to hit the streets. We are stripping pretty much everything minus the suspension so it can be rolled to the body shop for paint and body work. Once it returns we will replace all parts with new where needed and cleaned up original pieces. The car was minus its original engine, 3spd trans and 3rd member in the rear end housing. It does still have its original exaust manifolds and complete exhaust system that will be cleaned and reinstalled. This is not going to be a complete nut and bolt deal but we will make the sure the car is very nice and presentable. It seems that the 68 440/4spd that is in the car has been there a while looking at all the grease and dirt. I am not sure what modifications were made to the car vs factory details and will post many pictures in hope that some more knowlegable than I can point out some specific maxie details. It does have some very early looking traction bar setup like Caltracs and wonder if they are homemade or something that was sold over the counter way back when. So here are some pictures in no particular order.