8000 rpm with a flat tappet cam and solid lifters

Print Thread

8000 rpm with a flat tappet cam and solid lifters #1354780 12/18/12 08:58 AM 12/18/12 08:58 AM
Joined: Nov 2012 Posts: 358 western PA S Sb Valiant OP enthusiast
Sb Valiant OP enthusiast S Joined: Nov 2012 Posts: 358 western PA	I was just wondering has anyone ever been to 8000 rpm with a flat tappet cam, solid lifters and roller rockers and of course and good oiling system. Or has anyone been up around this rpm that bracket races for the most part???? 7508288-396603_296502033801257_1145254348_n.jpg (282 downloads)

Entire Thread
Subject	Posted By	Posted
8000 rpm with a flat tappet cam and solid lifters	Sb Valiant	12/18/12 12:58 PM
Re: 8000 rpm with a flat tappet cam and solid lifters	Sb Valiant	12/18/12 01:01 PM
Re: 8000 rpm with a flat tappet cam and solid lifters	Streetwize	12/18/12 01:55 PM
Re: 8000 rpm with a flat tappet cam and solid lifters	Guitar Jones	12/18/12 02:00 PM
Re: 8000 rpm with a flat tappet cam and solid lifters	therocks	12/18/12 02:23 PM
Re: 8000 rpm with a flat tappet cam and solid lifters	Sb Valiant	12/18/12 11:38 PM
Re: 8000 rpm with a flat tappet cam and solid lifters	Sb Valiant	12/18/12 10:28 PM
Re: 8000 rpm with a flat tappet cam and solid lifters	MR_P_BODY	12/18/12 02:55 PM
Re: 8000 rpm with a flat tappet cam and solid lifters	Triple Threat	12/18/12 04:58 PM
Re: 8000 rpm with a flat tappet cam and solid lifters	Oyvind Mopar	12/18/12 06:02 PM
Re: 8000 rpm with a flat tappet cam and solid lifters	qwkmopardan	12/18/12 06:18 PM
Re: 8000 rpm with a flat tappet cam and solid lifters	dogdays	12/18/12 07:32 PM
Re: 8000 rpm with a flat tappet cam and solid lifters	Guitar Jones	12/18/12 08:39 PM
Re: 8000 rpm with a flat tappet cam and solid lifters	1DGEMAN	12/18/12 09:31 PM
Re: 8000 rpm with a flat tappet cam and solid lifters	Sb Valiant	12/18/12 10:34 PM
Re: 8000 rpm with a flat tappet cam and solid lifters	Cab_Burge	12/19/12 02:57 AM
Re: 8000 rpm with a flat tappet cam and solid lifters	LA360	12/19/12 03:22 AM
Re: 8000 rpm with a flat tappet cam and solid lifters	WHITEDART	12/19/12 03:57 AM
Re: 8000 rpm with a flat tappet cam and solid lifters	D-50	12/19/12 11:52 PM
Re: 8000 rpm with a flat tappet cam and solid lifters	WHITEDART	12/20/12 12:48 AM
Re: 8000 rpm with a flat tappet cam and solid lifters	D-50	12/20/12 12:58 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To