Prepping Smooth Metal for Primer

Print Thread

Re: Prepping Smooth Metal for Primer [Re: RUNCHARGER] #1350417 01/01/13 06:20 PM 01/01/13 06:20 PM
Joined: Aug 2010 Posts: 428 Oakville, Ontario, Canada CDN72SE OP mopar
CDN72SE OP mopar Joined: Aug 2010 Posts: 428 Oakville, Ontario, Canada	QUOTE [You should have metalprepped the bare metal and immediately coated it. You will have problems later. Sheldon ] That's kind of what I am afraid of, hopefully it's not too late.

Entire Thread
Subject	Posted By	Posted
Prepping Smooth Metal for Primer	CDN72SE	12/12/12 08:14 PM
Re: Prepping Smooth Metal for Primer	DaytonaTurbo	12/12/12 08:27 PM
Re: Prepping Smooth Metal for Primer	CDN72SE	12/12/12 09:18 PM
Re: Prepping Smooth Metal for Primer	DaytonaTurbo	12/13/12 06:11 AM
Re: Prepping Smooth Metal for Primer	Kern Dog	12/13/12 06:26 AM
Re: Prepping Smooth Metal for Primer	charles6970	12/13/12 08:00 AM
Re: Prepping Smooth Metal for Primer	340SHORTY	12/13/12 12:53 PM
Re: Prepping Smooth Metal for Primer	CDN72SE	12/13/12 10:40 PM
Re: Prepping Smooth Metal for Primer	CDN72SE	12/13/12 10:43 PM
Re: Prepping Smooth Metal for Primer	bonefish	12/13/12 11:12 PM
Re: Prepping Smooth Metal for Primer	ahy	12/14/12 12:53 AM
Re: Prepping Smooth Metal for Primer	RUNCHARGER	12/14/12 03:05 AM
Re: Prepping Smooth Metal for Primer	CDN72SE	01/01/13 10:20 PM
Re: Prepping Smooth Metal for PrimerHat	demon	01/02/13 05:12 AM
Re: Prepping Smooth Metal for Primer	CDN72SE	01/01/13 10:10 PM
Re: Prepping Smooth Metal for Primer	GetAwayDriver	12/14/12 04:20 AM
Re: Prepping Smooth Metal for Primer	ek3	12/14/12 05:51 AM
Re: Prepping Smooth Metal for Primer	CDN72SE	01/01/13 10:17 PM
Re: Prepping Smooth Metal for Primer	CDN72SE	01/01/13 10:19 PM

Hop To