The truck was/is extremely clean and looks well taken care of. Ran good on the test drive so away I went. Only problem I had was there used to be a pyrometer in the exhaust manifold and the plug blew out at exit 23 on rt 271N so a stop at a Autozone and a quick lesson to the counter person on what a 1/8 NPT plug is and I was on my way. Left my house in NY around 5 AM flew to Columbus and drove home by 5:30PM. There were a couple of issues. Had a converter shift hunting issue at 50 mph, a ferrite on the Alternator out put cable fixed that. New door cable for the interior release for the rear pass door. Map light switches needed repair. and the worst is, all new ball joints and outer tie rod ends.....good as new.

7672349-newtruck4.JPG (24 downloads)

'01 P1500, Blown/Inj BAE,/Veney ,Bruno/CS2,Dana 60
'01 Dodge 3500 S Cummins Auto, Fresh air kit, 4" Exhaust,
'05 Dodge Magnum R/T - Too Much to list
'60 Willys CJ5
'01 International LPX - Project,DT466, Allison
'64 Plymouth Valiant, Inj 528 Hemi, 2spd