Quote:

Very nice my friend has a pro dominator tunnel ram that I would like to buy off him. Also has a strip domiantor single plane that I have for sure getting off him. We got a 340 stock bore and stock stroke that we are trying to get run and you just get all kinds of different answers. It has w2 econo heads with 2.08 in valves and 1.60 ex. 13:1 trw pistons with a 606 lift flat tappet cam thats getting replaced because it's unknown to us because it was in the motor when we got it. Has a 8 bolt moldex crank and a M-1 intake with a 750 cfm proform carb and 1 5/8 headers. Trying to get it to run 10's with out going to a full roller because don't have the money. Any suggestions? All car is 2800 lbs with driver and has a 904 tranny with trans brake. 10" 4000 stall converter and we are putting in 4.56 gears. Best so far has been 7.56 in 1/8 with 1.65 60 ft



Sell the 10" convertor and put a 8" unit with around 5000-5500 of stall speed. That alone will liven your combination up.

Alan Jones