Head studs and header flanges

Print Thread

Re: Head studs and header flanges [Re: 540challenger] #1322773 10/19/12 06:19 PM 10/19/12 06:19 PM
Joined: Feb 2004 Posts: 499 ohio W wj440 OP mopar
wj440 OP mopar W Joined: Feb 2004 Posts: 499 ohio	Sorry.. I was in a hurry. it a 440 ..and it has the 906 heads.. And used ARP studs. I should have explained it better. I forgot they used to put studs in for exhaust manifolds and head too. the studs are sticking out past the nuts about 1/4 inch. If I cut the stud off.. I will be able to get the flange against the head. But when I go to use the gasket.. And then The nuts are going to be to tall. Thanks again for your help. Walt 7427683-CellPhonepic6-10-2012244(Medium).jpg (158 downloads)

Entire Thread
Subject	Posted By	Posted
Head studs and header flanges	wj440	10/19/12 02:54 PM
Re: Head studs and header flanges	topside	10/19/12 03:14 PM
Re: Head studs and header flanges	Thumperdart	10/19/12 03:14 PM
Re: Head studs and header flanges	CompWedgeEngines	10/19/12 03:20 PM
Re: Head studs and header flanges	540challenger	10/19/12 05:02 PM
Re: Head studs and header flanges	wj440	10/19/12 10:19 PM
Re: Head studs and header flanges	rickraw	10/19/12 10:37 PM
Re: Head studs and header flanges	69dart	10/20/12 02:03 AM
Re: Head studs and header flanges	Cheatham	10/20/12 02:11 AM

Hop To