crank trigger or new distributor

Print Thread

Re: crank trigger or new distributor [Re: 408Dust] #1308950 09/25/12 05:09 PM 09/25/12 05:09 PM
Joined: Aug 2010 Posts: 40 Washington S SuperStock68Dart member
SuperStock68Dart member S Joined: Aug 2010 Posts: 40 Washington	Quote: Quote: sorry i was wrong. damper is a compitition products/proffesional products. Crank trigger should be mandatory when using that dampner, it will keep the outer ring from flying off your motor when the screws back out or break. had this happen three times to me while running customer cars on the chassis dyno....flying ring of death!!! ATI is all I use

Entire Thread
Subject	Posted By	Posted
crank trigger or new distributor	mopar dave	09/23/12 12:56 AM
Re: crank trigger or new distributor	Plymouth340	09/23/12 01:20 AM
Re: crank trigger or new distributor	mopar dave	09/23/12 01:47 AM
Re: crank trigger or new distributor	mopar65	09/23/12 01:55 AM
Re: crank trigger or new distributor	mopar dave	09/23/12 02:15 AM
Re: crank trigger or new distributor	mopar65	09/23/12 02:22 AM
Re: crank trigger or new distributor	mopar dave	09/23/12 04:07 AM
Re: crank trigger or new distributor	mopar65	09/23/12 04:41 AM
Re: crank trigger or new distributor	408Dust	09/23/12 08:30 AM
Re: crank trigger or new distributor	mopar dave	09/23/12 02:23 PM
Re: crank trigger or new distributor	SuperStock68Dart	09/25/12 09:09 PM
Re: crank trigger or new distributor	mopar dave	09/26/12 12:09 AM
Re: crank trigger or new distributor	408Dust	09/26/12 12:13 AM
Re: crank trigger or new distributor	mopar dave	09/26/12 12:30 AM
Re: crank trigger or new distributor	SuperStock68Dart	09/27/12 04:54 PM
Re: crank trigger or new distributor	AndyF	09/23/12 02:51 AM
Re: crank trigger or new distributor	mopar65	09/23/12 03:24 AM
Re: crank trigger or new distributor	mopar dave	09/23/12 03:54 AM

Hop To