Quote:
Quote:
so a couple are thinking along the lines of 1.45 hp/ cube. i would expect a bit less, more like 1.2hp/ cube. small HR cam with a small port will make great torque.
I say small port makes poor TQ (peek) and just not good for much of anything air speed in port just kills HP AND TQ.
I may have been tick aggressive on both my numbers on Robs dyno but I bet he gets close to the 600 HP.
maybe i should have clarified what i said about making great torque by saying it will make great torque down low (2500-4000) the small port will surely hurt it.
as far as what it makes on the dyno, i hope it does well and he backs it up at the track.
machine shop owner and engine builder
| 
