Magnum valve spring question

Print Thread

Magnum valve spring question #1294106 08/30/12 10:33 AM 08/30/12 10:33 AM
Joined: Jan 2007 Posts: 891 wisconsin 1BAD68 OP super stock
1BAD68 OP super stock Joined: Jan 2007 Posts: 891 wisconsin	I have a set of 318 magnum heads to install on my LA 318, got everything set to go but not sure about the springs. Current cam is a Comp Cams .440 lift. According to what I've read, that will change to .469 with the magnums 1.6 rockers. Will the stock magnum valve springs work with this? I can't find specs for those springs.

Entire Thread
Subject	Posted By	Posted
Magnum valve spring question	1BAD68	08/30/12 02:33 PM
Re: Magnum valve spring question	dogdays	08/30/12 05:05 PM
Re: Magnum valve spring question	65rbdodge	08/30/12 06:00 PM
Re: Magnum valve spring question	70Cuda383	08/30/12 06:07 PM
Re: Magnum valve spring question	goldmember	08/30/12 06:12 PM
Re: Magnum valve spring question	65rbdodge	08/30/12 07:47 PM
Re: Magnum valve spring question	GO_Fish	08/31/12 03:08 AM
Re: Magnum valve spring question	1BAD68	08/31/12 01:45 PM
Re: Magnum valve spring question	patrick	08/31/12 02:25 PM
Re: Magnum valve spring question	1BAD68	08/31/12 02:54 PM
Re: Magnum valve spring question	patrick	08/31/12 05:06 PM
Re: Magnum valve spring question	dogdays	09/03/12 06:06 PM

Hop To