Step by step 4150 to 4500 "598" W8 intake w/full port

Print Thread

Re: Step by step 4150 to 4500 "598" W8 intake w/full port [Re: MR_P_BODY] #1266064 07/15/12 11:38 PM 07/15/12 11:38 PM
Joined: Jan 2003 Posts: 1,784 PA W5DART66 OP top fuel
W5DART66 OP top fuel Joined: Jan 2003 Posts: 1,784 PA	This will be 35-40 hrs when done. I need min CS of 4.5" in Intake plenum and that is just about out of intake with out weld on the outside of intake.

Entire Thread
Subject	Posted By	Posted
Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	07/12/12 03:08 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	07/12/12 03:09 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	07/12/12 03:11 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	07/12/12 03:12 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	WHITEDART	07/12/12 03:41 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	MR_P_BODY	07/12/12 04:41 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	MR_P_BODY	07/12/12 04:52 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	fishy340	07/12/12 10:36 PM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	07/16/12 02:20 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	07/16/12 02:22 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	07/16/12 02:24 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	07/16/12 02:26 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	07/16/12 02:28 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	MR_P_BODY	07/16/12 02:40 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	07/16/12 03:01 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	MR_P_BODY	07/16/12 03:18 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	07/16/12 03:38 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	Ian	07/16/12 04:07 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	fishy340	07/16/12 01:00 PM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	Scamp451	07/16/12 03:34 PM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	07/17/12 01:57 PM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	07/22/12 03:25 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	07/22/12 03:28 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	fishy340	07/22/12 03:36 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	07/22/12 03:45 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	07/22/12 03:47 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	Hitman340	07/22/12 02:29 PM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	Triple Threat	07/22/12 03:51 PM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	07/30/12 02:49 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	07/30/12 02:50 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	07/30/12 02:51 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	DavidDean	07/30/12 03:10 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	WHITEDART	07/31/12 12:36 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	Hitman340	07/31/12 01:42 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	Leon441	07/31/12 02:57 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	07/31/12 03:11 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	07/31/12 03:18 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	WHITEDART	07/31/12 04:17 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	Thumperdart	07/31/12 04:50 PM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	emarine01	07/31/12 04:58 PM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	Thumperdart	07/31/12 05:32 PM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	fishy340	08/06/12 02:11 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	08/09/12 03:19 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	08/09/12 03:25 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	08/09/12 03:30 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	08/09/12 03:32 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	08/09/12 03:38 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	08/09/12 03:41 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	08/09/12 06:19 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	08/09/12 06:22 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	08/09/12 06:23 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	fishy340	08/09/12 06:31 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	Triple Threat	08/09/12 07:39 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	emarine01	08/09/12 07:31 PM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	BradH	08/10/12 03:54 PM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	HardcoreB	08/11/12 12:05 PM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	W5DART66	08/11/12 06:00 PM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	Brian Hafliger	08/11/12 08:23 PM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	WHITEDART	09/01/13 03:26 PM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	MR_P_BODY	09/01/13 03:44 PM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	moparniac	09/01/13 04:00 PM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	HardcoreB	09/02/13 10:01 PM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	Hitman340	09/03/13 12:28 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	408strokerdart	09/03/13 04:29 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	WHITEDART	09/03/13 04:45 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	Stroker Scamp	09/03/13 06:16 AM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	MR_P_BODY	09/03/13 02:32 PM
Re: Step by step 4150 to 4500 "598" W8 intake w/full port	MR_P_BODY	07/16/12 02:24 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To