Quote:
Some things to try --
jack up the car on the rear frame rails so the rear end extends fully---pull off the bottom end of the shock. It should extend at least 1" past the stud.
If you want a decent and affordable race shock --call Calvert. They have the Rancho 9-way design rear shocks--many lengths available. They will have you take a few measurements and get you the RIGHT model. dont just guess---they are good at this !
Their front drag shocks have a super loose extention--I like mine !
On your SS springs = fab some clamps up and clamp anywhere you can on the springs in front of the axle . They are super easy to make with a cutter/grinder / drill .
this
and you dont have no where near 700 hp. you should be at least 110mph in the 1/8 so start looking at your nitrous tune
Gen 3 power 6.22@110, 9.85@135 Follow @g3hemiswap on instagram
performance only racing, CRT, ultimate converter, superior design concepts, ThumperCarbs
|