Was going to post last week after I had to plumb in a pressure regulator, but one of the fittings was leaking, so I had to dork around with it all day yesterday and today getting different fittings, disassembling/reassembling.

6 pics altogether. here goes...

First one is looking down toward the pump/fuel-vapor separator. The nipple out of the FVS is 5/16. So short section of 5/16 hose onto a homemade 5/16 hardline. The hardline is 5/16 brakeline from Napa. I lengthwise cut 5/16 hose to wrap the hardline from the FVS all the way to the pressure regulator - for insulating purposes. Hence, all the cable ties to hold it in place on the hardline.