Help setting up a used 8 3/4" gear pattern

Print Thread

Re: Help setting up a used 8 3/4" gear pattern [Re: maximum entropy] #1204226 03/27/12 09:11 PM 03/27/12 09:11 PM
Joined: May 2007 Posts: 64 Airville Pa. B boomer member
boomer member B Joined: May 2007 Posts: 64 Airville Pa.	You may want to try to open the backlash up some more. Used gears wear and are usually around .011-.013 Had to redo my 8 3/4 set due to a bad pinion bearing and my best gear pattern was when my final backlash was set at .015......

Entire Thread
Subject	Posted By	Posted
Help setting up a used 8 3/4" gear pattern	dizuster	03/27/12 02:35 AM
Re: Help setting up a used 8 3/4" gear pattern	dizuster	03/27/12 02:35 AM
Re: Help setting up a used 8 3/4" gear pattern	dizuster	03/27/12 02:36 AM
Re: Help setting up a used 8 3/4" gear pattern	dizuster	03/27/12 02:37 AM
Re: Help setting up a used 8 3/4" gear pattern	kilroy	03/27/12 02:48 AM
Re: Help setting up a used 8 3/4" gear pattern	dizuster	03/27/12 11:52 AM
Re: Help setting up a used 8 3/4" gear pattern	dizuster	03/28/12 12:20 AM
Re: Help setting up a used 8 3/4" gear pattern	maximum entropy	03/28/12 12:51 AM
Re: Help setting up a used 8 3/4" gear pattern	boomer	03/28/12 01:11 AM
Re: Help setting up a used 8 3/4" gear pattern	dizuster	03/28/12 01:11 AM
Re: Help setting up a used 8 3/4" gear pattern	dizuster	03/28/12 02:36 AM
Re: Help setting up a used 8 3/4" gear pattern	dizuster	03/28/12 02:36 AM
Re: Help setting up a used 8 3/4" gear pattern	maximum entropy	03/28/12 07:40 PM
Re: Help setting up a used 8 3/4" gear pattern	383man	03/28/12 08:04 PM
Re: Help setting up a used 8 3/4" gear pattern	Skeptic	03/29/12 07:03 PM
Re: Help setting up a used 8 3/4" gear pattern	clovis	03/29/12 11:13 PM

Hop To