Everyone, I have slotted the holes on my 318-340 tray to fit on my 360 main bolts. Anyone know the correct spacing down? I have mocked it up using studs and washers but I had to use 3/8s of an inch to get it to clear the rods. I also bent it out a bit for clearance and now it's hitting on oilpan rail. Also, how much clearance is needed between tray and rod bolts? Just curious if anyone has done this before. Thanks, JP in the land Oz.
71 SWB, 413
77 SWB, 318
92 SWB, 5.2 magnum
79 Macho Short bed, 318
03 stratus coupe R/T
too many others not on the road!
|