.080 5/16 pushrod strenght - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech .080 5/16 pushrod strenght

Print Thread

Re: .080 5/16 pushrod strenght [Re: Leon441] #1189530 03/02/12 08:49 AM 03/02/12 08:49 AM
Joined: Jan 2003 Posts: 25,996 United Socialist States of Ame... T tboomer Too Many Posts
tboomer Too Many Posts T Joined: Jan 2003 Posts: 25,996 United Socialist States of Ame...	I would pm Todd at Competitionwedge. Give him your combos specs. For the Victor heads that will go on my RB 512,he speced Manton 3/8"x.095 pushrods. Need your rear end checked out? Contact Grizzly!!

Entire Thread
Subject	Posted By	Posted
.080 5/16 pushrod strenght	mopar dave	03/02/12 07:16 AM
Re: .080 5/16 pushrod strenght	Leon441	03/02/12 12:27 PM
Re: .080 5/16 pushrod strenght	tboomer	03/02/12 12:49 PM
Re: .080 5/16 pushrod strenght	dartman366	03/02/12 03:37 PM
Re: .080 5/16 pushrod strenght	Bob_Coomer	03/02/12 04:47 PM
Re: .080 5/16 pushrod strenght	ahy	03/02/12 04:53 PM
Re: .080 5/16 pushrod strenght	40ford	03/02/12 05:22 PM
Re: .080 5/16 pushrod strenght	mopar dave	03/02/12 06:25 PM
Re: .080 5/16 pushrod strenght	rickraw	03/03/12 12:48 AM
Re: .080 5/16 pushrod strenght	dusturbd340W5	03/03/12 01:30 AM
Re: .080 5/16 pushrod strenght	mopar dave	03/03/12 01:35 AM
Re: .080 5/16 pushrod strenght	robnbird	03/03/12 03:01 AM
Re: .080 5/16 pushrod strenght	mopar dave	03/03/12 03:48 AM
Re: .080 5/16 pushrod strenght	dusturbd340W5	03/03/12 04:21 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1