Quote:

72 Challenger with a 440 and this is the dry fit. I can get them to work but I was looking for information prior to purchasing so I thought I would post some pictures for others.

The steering knuckle is going to hit, and the trans pan is almost touching the outlet. I don't think the issue with the transmission is going to be a problem, but I will definatly have to tweak the drivers side to clear. Hope this helps...



You are screwed either way with those headers , if it were on a low deck it would clear the box and steering parts but be on the trans .

Personally that's too close for comfort on the pan , it's going to put lots of heat into the trans .

What primary tube size ? What's the engine build?