Challenger Valance attach/hardware

Print Thread

Re: Challenger Valance attach/hardware [Re: autoxcuda] #1179670 02/18/12 01:08 PM 02/18/12 01:08 PM
Joined: Jun 2003 Posts: 21,499 It's a dry heat gtx6970 Too Many Posts
gtx6970 Too Many Posts Joined: Jun 2003 Posts: 21,499 It's a dry heat	1/4-20 double ended threaded studs go into U-shaped clips on the ends to attach it to quarters and are secured with captive washer nuts 10-24 hex head machine screws attach it to the 2 valance brackets on the bottom between the tips 10-24 machine screws ( could either be phillips head or hex head screws )

Entire Thread
Subject	Posted By	Posted
Challenger Valance attach/hardware	Publicbottle	02/17/12 03:18 AM
Re: Challenger Valance attach/hardware	kidmopar	02/17/12 04:14 AM
Re: Challenger Valance attach/hardware	Publicbottle	02/17/12 05:42 AM
Re: Challenger Valance attach/hardware	Publicbottle	02/18/12 06:22 AM
Re: Challenger Valance attach/hardware	autoxcuda	02/18/12 07:50 AM
Re: Challenger Valance attach/hardware	autoxcuda	02/18/12 07:53 AM
Re: Challenger Valance attach/hardware	varunner	02/18/12 01:45 PM
Re: Challenger Valance attach/hardware	Publicbottle	02/18/12 04:49 PM
Re: Challenger Valance attach/hardware	gtx6970	02/18/12 05:08 PM
Re: Challenger Valance attach/hardware	Steve340	02/18/12 11:44 PM
Re: Challenger Valance attach/hardware	slimert	02/22/12 07:07 PM
Re: Challenger Valance attach/hardware	Challenger 1	02/22/12 07:39 PM
Re: Challenger Valance attach/hardware	Publicbottle	02/22/12 07:54 PM
Re: Challenger Valance attach/hardware	MoreParts	02/23/12 04:35 AM
Re: Challenger Valance attach/hardware	autoxcuda	02/23/12 07:13 AM
Re: Challenger Valance attach/hardware	Morty426	02/23/12 06:42 PM
Re: Challenger Valance attach/hardware	Eric_70_Chally	02/23/12 01:28 PM
Re: Challenger Valance attach/hardware	MoreParts	02/23/12 04:57 PM

Hop To