Quote:

I would just put a smaller cam in it, just keep an eye on the cylinder pressure.
My 440 has 170lbs of cylinder pressure and if I get some bad gas it will rattle and my motor has a tight quench(.030)
I would try the single plane intake with that big of a motor.





Depending on how stock you want to get. If you put a small enough cam w/ a tight LSA you could have detonation. But even a near stock cam with a wide LSA would probably work very well. And if you wanted to put a dual plane intake on, it would work fine too, but you might be leaving some power on the table.