Ok, so Im rebuilding the center carb, first of all, the metering block to bowl gasket is not the same, close, but not perfect, second, these carbs were dirty carbs when I got them, and the metering block gasket is missing and I have nothing to compare that gasket to. What is the correct gasket for this carb? I cand read the directions, the print is VERY small, and blurry as hell. basically there is 3 gaskets to choose from, a black one, and 2 blue ones. 1 blue one has a cut out for the squirter hole in the carb body, I dont think thats the correct one as it will not seal to the hole on the metering block, the 3rd one has the squirter hole in it, but looks like the black one, but is missing 1 little hole up by the rectangle center hole.

Pretty damn confusing for a simple carb.

Kasey