Quote:

---

Quote:

---

Thanks Ron, PM me if you have any 71/72 parts left.


Here's the shrinking discs...a 5" and a 9". Trick is to Hammer/dolly metal,then heat up the high spots with the shrinking disc, and cool rapidly with mist of water and the heated metal is supposed to shrink back down to the level of the surrounding metal. So it's a slow process, but experts say with patience, there should be a need for very little filler. ...We'll see...

Mark

---

I plan to try one of the shrinking discs too. Check out this site. Lots of good tips and tricks. http://www.metalmeet.com/forum/index.php

---