Quote:
Quote:
I believe Brian ran those numbers with W2's. J.Rob
p.s. I don't know what it would run but I just ran an EQ headed 3.58" stroke 360 at the EMC and made 515hp 495 ft/lbs. Here's the link 360 dyno pull @ EMC2011
is there a link to a build thread on here of that engine or a run down what parts were in it?
There will be an overview of the EMC 2011 in the next PHR mag with dyno charts and spec charts. There will also be a feature article on this 360 and Brett Miller's killer 410 in the near future. J.Rob
2009 PHR\EMC Competitor 2010 PHR\EMC Competitor 2011 PHR\EMC Competitor 2012 PHR\EMC Competitor 2013 PHR\EMC Competitor 2014 HotRod/EMC Competitor 2015 HotRod/EMC NoShow 2016 HotRod/EMC 3rd place SPEC Bigblock 2018 HotRod/EMC 7th place G3
|