I have a A-833 4 speed in my Cuda. Here is the problem(s) I have been having.
1. Shifts into Reverse really hard
2. Grinds shifting into 3rd & 4th under acceleration.
3. Pops out of 2nd under deceleration.
Most of these problems started after the 3rd-4th shifter fork pin broke off. I bought a new one and installed in the car.
Question is could these problems be related to the shifter fork being bent when the tranny was rebuilt and since there is a new fork in now it needs adjusted or does the entire tranny need rebuilt again?
thanks