340 compression reducing head gasket

Print Thread

340 compression reducing head gasket #1079653 09/21/11 07:45 AM 09/21/11 07:45 AM
Joined: Dec 2003 Posts: 974 Q qkRick OP super stock
qkRick OP super stock Q Joined: Dec 2003 Posts: 974	Hi People, Looking for a little help here. I have a nicely built 340+.030 with a compression ratio of 10.3: 1 Engine has steel heads. Could a simple head gasket change reduce the CR enough to run pump gas. If so any info re: thickness and manufacturer appreciated. Thanks MoParts

Entire Thread
Subject	Posted By	Posted
340 compression reducing head gasket	qkRick	09/21/11 11:45 AM
Re: 340 compression reducing head gasket	fox	09/21/11 12:48 PM
Re: 340 compression reducing head gasket	RapidRobert	09/21/11 02:30 PM
Re: 340 compression reducing head gasket	Belvedere2	09/21/11 03:29 PM
Re: 340 compression reducing head gasket	dogdays	09/21/11 03:38 PM
Re: 340 compression reducing head gasket	qkRick	09/21/11 05:27 PM
Re: 340 compression reducing head gasket	dogdays	09/21/11 06:50 PM
Re: 340 compression reducing head gasket	Dave Watt	09/21/11 11:47 PM
Re: 340 compression reducing head gasket	qkRick	09/22/11 12:51 AM
Re: 340 compression reducing head gasket	ahy	09/22/11 03:16 AM

Hop To