Brazing an exhaust port on an iron head

Print Thread

Re: Brazing an exhaust port on an iron head [Re: domingo] #1056762 08/21/11 12:52 PM 08/21/11 12:52 PM
Joined: Jul 2010 Posts: 3,502 SOUTH JERSEY HEMIFRED master
HEMIFRED master Joined: Jul 2010 Posts: 3,502 SOUTH JERSEY	Quote: Thats all I needed to see!!! Thanks! I will go ahead and fix my heads that way....thanks!!!! you had better know how much pre heating and cool down time it needs. all I have seen done used a furnace to braze home of the Sox and Martin Hemi Duster

Entire Thread
Subject	Posted By	Posted
Brazing an exhaust port on an iron head	domingo	08/19/11 05:09 PM
Re: Brazing an exhaust port on an iron head	S/ST 3040	08/19/11 05:17 PM
Re: Brazing an exhaust port on an iron head	domingo	08/19/11 05:27 PM
Re: Brazing an exhaust port on an iron head	DJVCuda	08/19/11 05:28 PM
Re: Brazing an exhaust port on an iron head	domingo	08/19/11 06:16 PM
Re: Brazing an exhaust port on an iron head	Hemi Allstate	08/19/11 06:34 PM
Re: Brazing an exhaust port on an iron head	domingo	08/19/11 09:17 PM
Re: Brazing an exhaust port on an iron head	POS Dakota	08/19/11 09:40 PM
Re: Brazing an exhaust port on an iron head	dannysbee	08/19/11 10:06 PM
Re: Brazing an exhaust port on an iron head	Hemi Allstate	08/20/11 03:45 PM
Re: Brazing an exhaust port on an iron head	domingo	08/20/11 04:11 PM
Re: Brazing an exhaust port on an iron head	HEMIFRED	08/21/11 04:52 PM
Re: Brazing an exhaust port on an iron head	MR_P_BODY	08/19/11 07:54 PM
Re: Brazing an exhaust port on an iron head	dogdays	08/19/11 08:46 PM
Re: Brazing an exhaust port on an iron head	torkrules	08/21/11 01:25 PM
Re: Brazing an exhaust port on an iron head	70Cuda383	08/21/11 03:45 PM
Re: Brazing an exhaust port on an iron head	justinp61	08/21/11 04:09 PM
Re: Brazing an exhaust port on an iron head	MR_P_BODY	08/21/11 04:17 PM
Re: Brazing an exhaust port on an iron head	Mike Swann	08/21/11 04:30 PM

Hop To