Taking out a 8-1/4 and installing a 9-1/4

Print Thread

Re: Taking out a 8-1/4 and installing a 9-1/4 [Re: dogdays] #1045929 08/03/11 01:36 AM 08/03/11 01:36 AM
Joined: May 2011 Posts: 340 Alaska 7 73rrak OP enthusiast
73rrak OP enthusiast 7 Joined: May 2011 Posts: 340 Alaska	I remember reading about setting it with an angle finder I hope I didn't waste a whole $10 on my Harbor Freight angle finder

Entire Thread
Subject	Posted By	Posted
Taking out a 8-1/4 and installing a 9-1/4	73rrak	08/02/11 08:26 PM
Re: Taking out a 8-1/4 and installing a 9-1/4	73rrak	08/02/11 11:32 PM
Re: Taking out a 8-1/4 and installing a 9-1/4	bboogieart	08/02/11 11:34 PM
Re: Taking out a 8-1/4 and installing a 9-1/4	dogdays	08/02/11 11:38 PM
Re: Taking out a 8-1/4 and installing a 9-1/4	73rrak	08/03/11 05:36 AM
Re: Taking out a 8-1/4 and installing a 9-1/4	feets	08/03/11 04:35 PM
Re: Taking out a 8-1/4 and installing a 9-1/4	dogdays	08/03/11 09:11 PM
Re: Taking out a 8-1/4 and installing a 9-1/4	project74	08/03/11 10:02 PM
Re: Taking out a 8-1/4 and installing a 9-1/4	feets	08/03/11 10:15 PM
Re: Taking out a 8-1/4 and installing a 9-1/4	73rrak	08/04/11 06:08 AM

Hop To