It's hard to tell my 1970 440-6 Shaker hood car has A/C when looking under the hood or inside the car, unless you know what your looking for.

Bouchillion for the pump and under alternator mounting bracket. You have to run an electric fuel pump. I did reroute the fan belts from their design to increase the amount of contact on the compressor pulley. I also upgraded the alternator from the one shown here.

Nostalgic air for the reciever/dryer & largest multi-pass condensor that fits in front of the entire radiator opening. Lines sourced locally from an A/C supply shop. I used black lines to keep them hidden. Cut them to fit, marked them for index them and then took them down to be crimped.

Inside the car, Vintage Air Gen IV Sure Fit is the only real choice.


Last edited by jbc426; 07/11/11 09:09 PM.