Took the engine block to the machine shop, decided to just have them do everything to it.

Here's a list of what is going to be done:

Magnaflux
Jet wash
align hone
deck
hone
bore .30 over
cam bearings + plugs
polish crank
balance assembly
press piston pins
Recondition rods

Going to use something like the trw six pack pistons for good compression, add most likely aluminum heads and a good comp cam. Edelbrock intake + carburetor and mallory ignition. Too finish it off it will be painted hemi orange



Got the spraygun, cleaning kit and paint in today












Things that I've been working on the past couple days