Okay, I measured the stripes on my quarter panels. I'm working by myself so I don't have anybody to hold the tape measure for me. I'm trying to go off the center of the rallye wheel center cap. The bottom stripe is 2 5/32, but the top stripe looks more like 2 3/16. At the front edge of the quarter where the stripe stops and goes into the door jamb, I get 1 5/32 on the bottom stripe and 1 1/16 on the top stripe. Its the beginning of the stripe that usually catches my eye. The bottom stripe is slightly fatter in the beginning and I think the whole "arc" is slightly different from top to bottom.