Previous Thread
Next Thread
Print Thread
Page 8 of 8 1 2 3 4 5 6 7 8
1972 LH Duster Taillight assembly [Re: BigDaddy440] #3192934
11/23/23 05:34 PM
11/23/23 05:34 PM
Joined: Jul 2003
Posts: 6,341
SE PA.
Q
QuickBpBp Offline
master
QuickBpBp  Offline
master
Q

Joined: Jul 2003
Posts: 6,341
SE PA.
Nice used 1972 LH taillight assembly. The lense is in good condition with no cracks in the reverse area like most. It will need repainted as the silver is washed off. There is red paint on the edge. The housing is excellent condition with no broken tabs even the locator pins are still there. $120 plus shipping

Parts are located in SE PA.
Can send more pictures if interested.
E-mail bretts440”at”frontiernet.net use @ for “at”.
Thanks for free ad Moparts!

IMG_4596.jpeg (496 downloads)
IMG_4599.jpeg (494 downloads)
IMG_4601.jpeg (492 downloads)
IMG_4600.jpeg (489 downloads)
Last edited by QuickBpBp; 11/29/23 08:14 PM.
Re: A Body - Parts For Sale - SSBC 4 piston brake setup [Re: moparts] #3193427
11/26/23 03:19 PM
11/26/23 03:19 PM
Joined: Jan 2003
Posts: 8,417
Candler,NC / Myrtle Beach, SC
J
JDMopar Offline
master
JDMopar  Offline
master
J

Joined: Jan 2003
Posts: 8,417
Candler,NC / Myrtle Beach, SC
I am selling this new, but unused and sat around for a while brake setup because I won't need it. I took it in trade on a parts deal with intent to use it on my 65 Barracuda, but have decided to use later A body BBP disc's. This is a SSBC (Stainless Steel Brake Corp.) setup. The calipers are copies of factory Chrysler 4 piston Kelsey Hayes brakes. They mount to A body 10" drum spindles with an adapter. These were installed on a 71 Dart and never left the garage before the previous owner switched to a complete RMS front suspension setup. There is no brake dust on these and all I have done is to spray some brake cleaner on a rag and wipe them off a little for pics. Rotors still have crosshatch on them as new. Rotors have 7/16 studs in the 4" bolt pattern position, but could be switched to 4 1/2" bolt pattern by installing 1/2" wheel studs in that position. Flex hose are new and don't appear to have ever had fluid thru them. Lower ball joint bolts are included. I will ship them, but the cost is on the buyer. I will not charge extra for boxing and packing. They are located in Candler, NC 28715, and I make regular trips to Myrtle Beach, SC and will gladly drop them off along the way if a buyer lives in that direction. $450 plus shipping if meetup can't work. Payment will be USPS money order only. Thanks for looking. PM me here if interested.

SALE PENDING! 11-26-23 @6:51 pm wave



IMG_1842.JPG (399 downloads)
IMG_1844.JPG (399 downloads)
IMG_1843.JPG (399 downloads)
IMG_1840.JPG (398 downloads)
Last edited by JDMopar; 11/26/23 06:52 PM.
Re: A Body - Parts For Sale [Re: moparts] #3193548
11/27/23 06:02 AM
11/27/23 06:02 AM
Joined: Aug 2003
Posts: 15,933
oak park, il.
D
dsd70bee Offline
I Live Here
dsd70bee  Offline
I Live Here
D

Joined: Aug 2003
Posts: 15,933
oak park, il.
1969 & 1970 Dodge Charger & 1969 Plymouth Barracuda flip out gas cap, NOS in the box, never been installed on a car $375.00 (708) 288-2879

parts 11-26-2023 013.JPG (365 downloads)
parts 11-26-2023 015.JPG (365 downloads)
parts 11-26-2023 020.JPG (365 downloads)
parts 11-26-2023 016.JPG (365 downloads)
Demon hood and NOS dual snorkel scoop [Re: moparts] #3193864
11/28/23 10:54 AM
11/28/23 10:54 AM
Joined: Jan 2003
Posts: 5,477
Detroit area
6PAX Offline
master
6PAX  Offline
master

Joined: Jan 2003
Posts: 5,477
Detroit area
For sale are a 72 Demon hood and an NOS 73-74 style dual snorkel scoop. I bought this for my 70 Dart but I have decided to sell it as I could use the money for parts for my 69 Dart project. The hood was a base Demon hood with the holes for the scoop added as well as holes for hood pins. The hood was pretty straight when I got it but it had several layers of paint on it so my paint guy suggested I have it media blasted (cost me $125) so it won't need to be blasted in the future. When I got it back from the blaster, it was no longer completely smooth as they must have not blasted it the proper way. So now it has some very shallow impressions in it that correspond to the areas in between the support structure on the underside (I hope this makes sense). Anyway, my painter put on a coat of epoxy primer for the time being to keep it from rusting. So it does need a skim coat of filler in certain areas. Also, whoever drilled the holes for the scoop studs made them oval shaped apparently to get the studs to all drop through the hood easier. This is unnoticeable when the scoop is in place. The scoop is NOS which I bought many years ago. It is the later style that has the rise in the center of the bottom to clear the center ridge of the later hoods. I have the original studs for it but I don't have the original nuts. I am including a new can of body filler with hardener I bought to smooth out the impressions. I am asking $900 or best offer. The scoop is not for sale separately. No shipping. Local pickup only in the Detroit area.

Hood and Scoop.JPG (277 downloads)
Hood and Scoop5.JPG (277 downloads)
Hood and Scoop2.JPG (276 downloads)
Hood and Scoop3.JPG (276 downloads)
Re: A Body - Parts For Sale [Re: moparts] #3194153
11/29/23 12:15 PM
11/29/23 12:15 PM
Joined: Jan 2006
Posts: 4,012
ct.
M
moparlouie Offline
master
moparlouie  Offline
master
M

Joined: Jan 2006
Posts: 4,012
ct.
A & B Body, Gold Steering wheel (gold Duster) in very nice condition. Wheel, horn switch & cover, no center medallion. $200 plus the ride. lafrancebiglou@aol.com

100_6927.JPG (200 downloads)
100_6928.JPG (199 downloads)
100_6930.JPG (199 downloads)

Have been a member for years!
Re: A Body - Parts For Sale [Re: moparts] #3194155
11/29/23 12:23 PM
11/29/23 12:23 PM
Joined: Jan 2006
Posts: 4,012
ct.
M
moparlouie Offline
master
moparlouie  Offline
master
M

Joined: Jan 2006
Posts: 4,012
ct.
1972 AM/FM Radio(SALE PENDING ON RADIO) Powers up and makes static over the speaker, and the light works also. No cut wires. $125, also an NOS ($100)and used (20) radio bezel, plus shipping. lafrancebiglou@aol.com

100_6925.JPG (197 downloads)
102_4378.JPG (197 downloads)
Last edited by moparlouie; 12/01/23 07:46 AM.

Have been a member for years!
Re: A Body - Parts For Sale [Re: moparts] #3194169
11/29/23 12:38 PM
11/29/23 12:38 PM
Joined: Jan 2006
Posts: 4,012
ct.
M
moparlouie Offline
master
moparlouie  Offline
master
M

Joined: Jan 2006
Posts: 4,012
ct.
Blue and Black low level horn buttons, very clean pieces, $65 each, plus shipping. lafrancebiglou@aol.com

100_6922.JPG (192 downloads)
100_6924.JPG (192 downloads)

Have been a member for years!
Nos 70-4 Dart “Swinger” emblems [Re: moparlouie] #3194270
11/29/23 07:33 PM
11/29/23 07:33 PM
Joined: Jul 2003
Posts: 6,341
SE PA.
Q
QuickBpBp Offline
master
QuickBpBp  Offline
master
Q

Joined: Jul 2003
Posts: 6,341
SE PA.
Nos Dart “Swinger” emblems. These are 3 pin and can be used on 70-74 Swingers. I know early ones had a 4th pin on the flower but other than that they look the same. Not cheap lead cast reproduction. $130 shipped.

Parts are located in SE PA.
Can send more pictures if interested.
E-mail bretts440”at”frontiernet.net use @ for “at”.
Thanks for free ad Moparts!

IMG_4358.jpg (173 downloads)
IMG_4359.jpg (172 downloads)
IMG_4361.jpg (172 downloads)
IMG_4362.jpg (172 downloads)
Last edited by QuickBpBp; 11/29/23 08:13 PM.
Nos Dodge 68-72 Dart "DODGE" hood emblem [Re: QuickBpBp] #3194277
11/29/23 07:49 PM
11/29/23 07:49 PM
Joined: Jul 2003
Posts: 6,341
SE PA.
Q
QuickBpBp Offline
master
QuickBpBp  Offline
master
Q

Joined: Jul 2003
Posts: 6,341
SE PA.
Nice Nos 68-72 Dart "Dodge" hood emblem. Not a cheap lead cast reproduction. I believe it fits those years. $105 shipped.

Parts are located in SE PA.
Can send more pictures if interested.
E-mail bretts440”at”frontiernet.net use @ for “at”.
Thanks for free ad Moparts!

1701304671067.png (169 downloads)
img_4439-jpeg.jpg (169 downloads)
Last edited by QuickBpBp; 11/29/23 08:12 PM.
71-74 340/360 Exhaust Manifolds [Re: QuickBpBp] #3194288
11/29/23 08:12 PM
11/29/23 08:12 PM
Joined: Jul 2003
Posts: 6,341
SE PA.
Q
QuickBpBp Offline
master
QuickBpBp  Offline
master
Q

Joined: Jul 2003
Posts: 6,341
SE PA.
Nice set of 340/360 exhaust manifolds. Looks like these fit A-body with the passenger side also fitting B & E body. They are cast numbers 3418623 & 3614368. The passenger side has never been drilled for a heat riser so you don’t have to deal with it rattling around or rebuilding it or just welding the holes shut. These are dated 3-20-73 on the drivers side and 12-3-73 on the passenger side so probably from a 74 360. Nice with no cracks and will detail nice as they are not heavily rusted like most I have seen. $400pr and shipping

Parts are located in SE PA.
Can send more pictures if interested.
E-mail bretts440”at”frontiernet.net use @ for “at”.
Thanks for free ad Moparts!

IMG_4390.jpg (163 downloads)
IMG_4587.jpg (163 downloads)
IMG_4589.jpg (163 downloads)
IMG_4389.jpg (163 downloads)
Last edited by QuickBpBp; 11/29/23 08:15 PM.
Nos 71-76 Dodge Dart “Dodge” emblem P. # 3613151 [Re: QuickBpBp] #3194292
11/29/23 08:19 PM
11/29/23 08:19 PM
Joined: Jul 2003
Posts: 6,341
SE PA.
Q
QuickBpBp Offline
master
QuickBpBp  Offline
master
Q

Joined: Jul 2003
Posts: 6,341
SE PA.
Nice nos 71-76 Dart “Dodge” emblem still in the wrapper. It’s a stick on Chromed plastic emblem part number 3613151. SOLD THANKS MOPARTS


Parts are located in SE PA.
Can send more pictures if interested.
E-mail bretts440”at”frontiernet.net use @ for “at”.
Thanks for free ad Moparts!


IMG_4707.jpg (232 downloads)
IMG_4708.jpg (232 downloads)
IMG_4709.jpg (232 downloads)
Last edited by QuickBpBp; 12/01/23 09:51 AM.
4 piston discs Complete Builder SOLD [Re: moparts] #3194591
11/30/23 09:28 PM
11/30/23 09:28 PM
Joined: Dec 2004
Posts: 1,540
DC, MD Suburbs
440PURSUIT Offline
pro stock
440PURSUIT  Offline
pro stock

Joined: Dec 2004
Posts: 1,540
DC, MD Suburbs
Complete setup with Calipers, rotors ? w hubs, correct bolts, backing plates, bearing, lower control arms.
.

SOLD

IMG_3162.jpeg (184 downloads)
IMG_3164.jpeg (184 downloads)
IMG_3165.jpeg (184 downloads)
Last edited by 440PURSUIT; 12/03/23 11:41 PM.
Re: Nos 71-76 Dodge Dart “Dodge” emblem P. # 3613151 [Re: QuickBpBp] #3194593
11/30/23 09:45 PM
11/30/23 09:45 PM
Joined: Feb 2006
Posts: 1,064
Tennessee
7
727builder Offline
super stock
727builder  Offline
super stock
7

Joined: Feb 2006
Posts: 1,064
Tennessee
Complete wiring harness from 273 v8 1968 4dr dodge dart. $125

Both tail lights from the same 68 dart. Driver quality. Pitting on the housing. Lenses look real good. $100

Quicker reply by email 👇👇
Mcroft360@aol.com

Thanks Moparts

20231130_144843.jpg (182 downloads)
20231130_145135.jpg (182 downloads)
20231130_144851.jpg (182 downloads)
20231130_144301.jpg (182 downloads)
1970 FSM [Re: moparts] #3195232
12/03/23 09:04 PM
12/03/23 09:04 PM
Joined: Jan 2003
Posts: 1,579
westerly, ri. usa
4
440lebaron Offline
pro stock
440lebaron  Offline
pro stock
4

Joined: Jan 2003
Posts: 1,579
westerly, ri. usa
factory service manual dart/challenger
shows 198-225 318-340 383-440 426hemi
$55.00 USPS lower 48
prefer check/moneyorder
paypal family/friends OK

pm, email garycastagna@gmail.com, call 4017871180

20231203_200028.jpg (77 downloads)
20231203_200049.jpg (77 downloads)

all parts are sold as is, all parts are considered used no warranties or returns
paypal/check/money order, shipping is from zip 02891, buyer pays paypal fees 24% IRS 1099A plus 3% of part price, check/money order preferred
site is not monitored 24/7 there might be a delay in response

Page 8 of 8 1 2 3 4 5 6 7 8






Powered by UBB.threads™ PHP Forum Software 7.7.1