440 Piston selection question - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 440 Piston selection question

Print Thread

Page 2 of 2

1

2

Re: 440 Piston selection question [Re: MrMayhem] #2648846 04/25/19 12:51 PM 04/25/19 12:51 PM
Joined: Jun 2006 Posts: 5,159 CT GTX MATT master
GTX MATT master Joined: Jun 2006 Posts: 5,159 CT	Originally Posted by MrMayhem I want thank those who suggested talking to Todd Marsh! He's gonna hook me up with the Wiseco pistons/rings! Cool, I always forget about him. Will try him next time myself. Last edited by GTX MATT; 04/25/19 12:52 PM. Now I need to pin those needles, got to feel that heat Hear my motor screamin while I'm tearin up the street

Re: 440 Piston selection question [Re: viperblue72] #2648868 04/25/19 01:44 PM 04/25/19 01:44 PM
Joined: Jun 2018 Posts: 114 Oklahoma City, Oklahoma M MrMayhem OP member
MrMayhem OP member M Joined: Jun 2018 Posts: 114 Oklahoma City, Oklahoma	Originally Posted by viperblue72 I got the wiseco pro tru with rings through summit for 485. They have a 2.050 compression height. Great bang for buck. I do wish the compression height was a little taller but I can make up the difference in cuting the deck height...

Re: 440 Piston selection question [Re: MrMayhem] #2649160 04/26/19 08:55 AM 04/26/19 08:55 AM
Joined: Feb 2006 Posts: 1,048 The Great White North RAMM super stock
RAMM super stock Joined: Feb 2006 Posts: 1,048 The Great White North	Mahle Motorsports makes an amazing piston in a 2.065" CHT with an impossible to beat ring pack featuring a 1mm/1mm thg/2mm size. I wouldn't even consider anything else. J.Rob 2009 PHR\EMC Competitor 2010 PHR\EMC Competitor 2011 PHR\EMC Competitor 2012 PHR\EMC Competitor 2013 PHR\EMC Competitor 2014 HotRod/EMC Competitor 2015 HotRod/EMC NoShow 2016 HotRod/EMC 3rd place SPEC Bigblock 2018 HotRod/EMC 7th place G3

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1