E Body - Cars/ Parts Wanted - 2nd Quarter

Looking for a 1970 Left 340 Exhaust manifold gasket part # 2946105 or P2946105 or even a Repro one.
PM, text or call Cell 914-843-9617
Thanks Bob

Looking for a NOS E Body Idler Arm part # 2835834 or 2835886
PM ,Text or cell 914-843-9617
Thanks Bob

Looking for a good set of original front disc brake rotors, part number 3580506. Mine are below minimum thickness. Cash or trades.

Thanks for the ad!

WTB early 15X7 Rallye Wheels dated: 7-25-69. I really only need (2) but would consider buying (1) or more.

Thank you

wanted clean original rally dash bezel..(plastic around gauges,) . woodgrain part not needed, need for 70-71 or 72 (just no seat belt hole)....want an original that is straight at top where light bar meets....doing high end restoration so need a nice one and will pay for the right one ,thx keith 318-393-1502

Looking for 70/71 roller, it can be stripped pretty clean as I want the frame rails, front and rear, firewall Non A/C if possible and if floor pans are decent it would be a huge plus I am trying to repair a 71 Challenger that I bought that is worse than I had anticipated to be. I would appreciate any help anyone has to offer. Please contact me if you have what I need and are reasonable at Johnmn420@aol.com or 952-239-6883.
Looking for a good set of front 70/71 Challenger Turn signal housings with lenses and the mounting screws. Please send pics looking for a nice set. Thanks

John Chaney

Looking for passenger side exhaust manifold for 1970 cuda 340 Thanks al. email at a.oger@hotmail.com

Looking for a NOS or used nice condition heavy duty (yellow) Tran’s mount. Part number 2892473. PM here or email erikhigh89@yahoo.coming

Looking for a set of (Hi / Low) horns in good working condition for my 70 Challenger.
Message me if you've got a set and can show they work, thanks.

wanted nos red side marker reflectors for a 1971 cuda...these are the ones long and skinny with the tabs on the back, thx keith 318-393-1502

still looking

wanted 2071604, nos sway bar link bushings, the number 2071604 will be on the bushing itself as the later ones dont have the number...theses were used on front sway bar links and rear sway bar links...need 8 or what do you have ,thx keith 318-393-1502

Looking for the Drivers Side, lower, trunk hinge support bracket, as show in the picture.
Challenger...not sure if Cuda is the same.
I believe they are the same for all model years.

PM me here.
Thanks

looking for 1971 Challenger Seat Belt Set. Need all pieces in black. Retractors, Shoulder harnesses, front, rear. Need good condition for high end restoration. pete@ntrcs.com