Posted By: Adrielp
Who are you guys using to port your heads? - 09/02/20 02:20 PM
Good Morning guys, I think I'm going to end up having to port my own heads but I figured I should pose the question anyone here as to who you guys are using to get your heads ported. I have a set of BGE heads I need to have ported for my engine. I'm always costs minded so if you guys don't mind, please add the cost as well. Thanks, any help is appreciated. The head will be a max effort deal, so opening the throat up to max, keeping velocities up is going to be a must.
-Adriel
Posted By: Bad340fish
Re: Who are you guys using to port your heads? - 09/02/20 04:51 PM
I do not have a Gen III yet but Ray Meyers will port mine when I get it. Ray Meyers SixpackGut on here and Born Again Hot Rods on FaceBook and Instagram
Posted By: RTSE4ME
Re: Who are you guys using to port your heads? - 09/03/20 02:26 AM
I had Ray port mine. It was a while ago so not sure what the cost is now. Give him a call he is a good guy.
Posted By: w2stroker
Re: Who are you guys using to port your heads? - 09/03/20 12:58 PM
Ray Meyers- problem solved
Posted By: 340Cuda
Re: Who are you guys using to port your heads? - 09/03/20 07:45 PM
Ray Meyers- problem solved
Ray has a Hot Rod Drag Week winning Barracuda coupe with a GIII hemi so his experience with this engine is very real.
Posted By: Dragula
Re: Who are you guys using to port your heads? - 09/04/20 03:10 AM
Ray Meyers- problem solved
Ditto....now if I could only find a 6.1 block.
Posted By: GY3
Re: Who are you guys using to port your heads? - 09/15/20 05:49 PM
Ray Meyers- problem solved
Ditto....now if I could only find a 6.1 block.
Try member 70B5Cuda here on the board. He parts out a lot of late model SRT8 cars. I can get you his personal info and phone if you can't get ahold of him using his username.
Posted By: 52savoy
Re: Who are you guys using to port your heads? - 12/25/20 07:37 AM
Posted By: Brian Hafliger
Re: Who are you guys using to port your heads? - 12/26/20 11:24 PM
If nothing pans out, we also port the Gen3 Hemi heads with great results...
Brian
IMM Engines
Posted By: Kiddart
Re: Who are you guys using to port your heads? - 12/28/20 02:22 AM
They have a really good Gen 3 hemi CNC Program
katechengines.com
Posted By: Taylor
Re: Who are you guys using to port your heads? - 02/08/21 10:28 PM
I think those are actually 5.7 hemi blocks.
Posted By: Taylor
Re: Who are you guys using to port your heads? - 02/08/21 10:32 PM
My Uncle did my Eagles , but Ray Meyers name comes up a lot when it comes to good flowing G3 heads , In Delaware there's a shop called performance injection equipment who have the best flowing 03-08 heads not sure if they do any Apache or Eagle head work.
Posted By: Bubba
Re: Who are you guys using to port your heads? - 05/12/21 05:08 PM
Thitek. Craig is truly a game changer!
Posted By: W5DART66
Re: Who are you guys using to port your heads? - 05/15/21 02:39 AM
Posted By: Taylor
Re: Who are you guys using to port your heads? - 05/31/21 01:46 PM
Yesterday I got to see a set of KATECH BGE CNC heads put a 25hp beating on a set of MMX ported CNC heads on a 431ci BGE block build , both test were using Comp cams Stage 3 HRT 228/236 , Edelbrock Intake dyno headers (1 7/8) 90mm TB Holleys Terminator EFI set up......FWIW the MMX were 10 hp better then Frankenstein Apache heads.
