Posted By: superhog88
Main bearings? - 04/29/20 07:24 PM
What brand is everyone using in your builds
Is there any brands to definitely stay away from?
Thanks for the help
Posted By: B5 Classic
Re: Main bearings? - 05/01/20 03:25 AM
test test test.
I replied earlier today and now I don't see my post.
test test test
Posted By: B5 Classic
Re: Main bearings? - 05/01/20 03:38 AM
Guess it's working now.
I have a 6.1 based 393 stroker built by BES Racing. They used ACL main bearings and King rod bearings.
Posted By: sycboi
Re: Main bearings? - 05/01/20 05:20 AM
I used Sealed Power for main and rod bearings. No issues...
Posted By: The Shadow
Re: Main bearings? - 05/01/20 07:23 PM
The factory stuff is good.
I needed to use the clevite 77 for the +001 oil clearance on the mains
Posted By: aus370
Re: Main bearings? - 05/02/20 10:52 PM
I used Clevite high perfomance on an un-machined 6.4 crank , MS-2296-HX , gave me .0026" on the mains and CB-1808-HN , gave me .002" on the rods.
The X at the end of part numer means +.001" extra clearance.